Description
Product Description
RHG - Galvanized Steel Roof Access Hatch
RHG Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building
30in x 54in, Galvanized Steel Roof Access Hatch
(762mm) x (1371.6mm)
Product Features
- Weather tight construction
- Convenient one-hand operation
- 12" high insulated curb
- Supports 40lbs./sq. ft. live load
- G90 Galv. Steel (RHG)
- Stainless Steel Hardware
Optional Features RHG
- Stainless Steel cover, curb
- Polycarbonate domes for daylighting
- Louvered Curbs
- Curb Mounted Units
- Curb pitch corrected for sloped roof
- Higher curb heights for "green roof" applications
Optional Features RHG
- Stainless Steel cover, curb: Double-skin construction (box type design) with 1in Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
- Polycarbonate domes for daylighting: 14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
- Louvered Curbs: Heavy duty galvanized steel pintle hinges with 3/8" pin
- Curb Mounted Units: Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.
- Curb pitch corrected for sloped roof: Self latching, Stainless Steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
- Higher curb heights for "green roof" applications: Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel gray paint.
Technical Documentation:
-
Description
Product Description
RHG - Galvanized Steel Roof Access HatchRHG Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building
30in x 54in, Galvanized Steel Roof Access Hatch
(762mm) x (1371.6mm)Product Features
- Weather tight construction
- Convenient one-hand operation
- 12" high insulated curb
- Supports 40lbs./sq. ft. live load
- G90 Galv. Steel (RHG)
- Stainless Steel Hardware
Optional Features RHG
- Stainless Steel cover, curb
- Polycarbonate domes for daylighting
- Louvered Curbs
- Curb Mounted Units
- Curb pitch corrected for sloped roof
- Higher curb heights for "green roof" applications
Optional Features RHG
- Stainless Steel cover, curb: Double-skin construction (box type design) with 1in Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
- Polycarbonate domes for daylighting: 14 gauge galvanized steel with 1" thick Polyiso (R-6) insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
- Louvered Curbs: Heavy duty galvanized steel pintle hinges with 3/8" pin
- Curb Mounted Units: Gas spring operators allow cover to open and close with ease. Stainless Steel inside pull handle allows for easy control when closing cover.
- Curb pitch corrected for sloped roof: Self latching, Stainless Steel outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
- Higher curb heights for "green roof" applications: Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel gray paint.
Technical Documentation:
